1,000 Mile Service
- Change engine oil and filter
- Inspect air cleaner, service as required
- Change primary chain lubricant, clean drain plug
- Check and adjust rear belt
- Adjust primary chain
- Check clutch adjustment, adjust as required
- Change transmission lube and clean drain plug
- Inspect brake pad linings and discs for wear
- Check brake fluid reservoir levels and condition
- Inspect oil lines and brake system for leaks
- Lubricate front brake hand lever, throttle control cables, clutch control cables (and hand lever), and rear brake pedal bushing *
- Lubricate Jiffy stand
- Adjust steering head bearings, lubricate (springer models only)
- Check,adjust operation of enrichener, throttle control
- Inspect fuel valve,lines and fitting, for leaks
- Check operation of all electrical equipment and switches
- Check cruise control disengage switch and components*
- Check battery and clean connections
- Inspect spark plugs
- Check tire pressure and inspect tread
- Adjust springer rocker bearings*
- Check air suspension-pressure, operation, and leakage*
- Check tightness of all critical fasteners: Hand controls, brake system, axle nuts, front fork components, riser and handlebar fasteners.
- Lubricate hinges, latches-fuel door, tour-pak, saddle bags
- Check engine idle speed
- Road test
5,000 Mile Service
- Change engine oil and filter
- Inspect air cleaner, service as required
- Change primary chain lubricant, clean drain plug
- Check and adjust rear belt
- Adjust primary chain
- Check clutch adjustment, adjust as required
- Change transmission lube and clean drain plug
- Inspect brake pad linings and discs for wear
- Check brake fluid reservoir levels and condition
- Inspect oil lines and brake system for leaks
- Lubricate front brake hand lever, throttle control cables, clutch control cables (and hand lever), and rear brake pedal bushing *.
- Lubricate Jiffy stand
- Adjust steering head bearings, lubricate (springer models only)
- Check,adjust operation of enrichener, throttle control.
- Inspect fuel valve,lines and fitting, for leaks
- Check operation of all electrical equipment and switches
- Check cruise control disengage switch and components*
- Check battery and clean connections
- Inspect spark plugs
- Check tire pressure and inspect tread
- Adjust springer rocker bearings*
- Check air suspension-pressure, operation, and leakage*
- Check tightness of all critical fasteners: Hand controls, brake system, axle nuts, front fork components, riser and handlebar fasteners
- Lubricate hinges, latches-fuel door, tour-pak, saddle bags
- Check engine idle speed
- Road test
10,000 Mile Service
- Check operation of all electrical equipment and switches.
- Remove battery, check electrolyte level. Check and clean Battery connections. Charge and test battery.
- Inspect and change engine oil and oil filter
- Inspect and change Transmission lubricant. Clean magnetic drain plug.
- Inspect air cleaner and service as required
- Clean tappet oil screen.
- Lubricate brake pedal mechanism.
- Check rear brake pedal adjustment and free-play
- Inspect oil lines and brake system for leaks
- Change fork oil
- Check front fork bearing adjustment
- Check stabalizer links* and engine mounts
- Lubricate: Front brake lever,throttle control cables, speedometer cable*
- Clutch control cable and lever.
- Check operation of throttle, choke or enrichener controls.
- Check air suspension: pressure and operation*
- Inspect fuel valve, lines and fittings.
- Replace spark plugs.
- Check and lubricate the foot shifter and Jiffy stand mechanism.
- Change primary chain case lubricant and clean magnetic drain plug.
- Check and adjust primary chain.
- Perform clutch adjustment.
- Check ignition timing, V.O.E.S.operation and vacuum lines.
- Check tire pressure and inspect tread.
- Check and adjust drive belt or chain.
- Check wheel spoke tightness or inspect solid wheels*
- Inspect Brake pads and disc rotors for wear**
- Check tightness of all fasteners, except engine head bolts.
- Check engine low and fast idle speed adjustment.
- Check shock absorber. (Buell only)
- Lubricate hinges, latches/fuel door, tour-pak and saddle bags*
- Check cruise control, disengage switch and other components.
- Repack wheel bearings front and rear.
- Adjust Springer rocker bearings.
- Inspect all detachable mounting hardware bushings.
- Clean fuel tank filter screen.
- Road Test
*If applicable
**May require additional cost for parts and labor
Schedule Your Appointment Now or Call the Shop at 480-497-3573.
